The new generation Gyro-navi robot cleaner supported by Gyroscopes and acceleration transducers - Mamibot EXVAC600 Pilot, which features three levels of adjustable suction power, three levels of wet mopping seepage speed, up to 130 minutes of running time, App, voice/smart speaker control, multiple cleaning modes, self-charging, scheduling, cleaning pattern Mapping on APP, etc.
2022 New Arrival
Hybrid Robot Cleaner EXVAC600 Pilot
by Gyroscope Navigation
Mapping the floor when Cleaning
EXVAC600 maps the floor during cleaning process, users could check the map on APP timely, verify it’s cleaning procedure and efficiency
*Robots with gyroscope navigation system can map floor but doesn’t save maps on APP.
3 Levels of Suction
Mapping When Cleaning
3 Levels of Mopping
Dual Side Brushes
Up to 2CM Climbing
Only 7.5cm High
APP control OTA Upgrading
Make a map in cleaning
View the APP to get the timely map and understand its cleaning patterns better
EXVAC600 is configured with 14 pieces of anti-bumping sensors, which are able to help it react fast and properly when it touches desk legs, walls, and other furniture.
Strong Suction Power Up to 2800Pa
Adjust your robot’s suction in three levels: 1Kpa/ 2Kpa/2.8Kpa by a tap on the APP
SUPER Water Tank of 370ml (+/-5%)
The three levels of seeping in wet mopping mode can be controlled by APP . the water flow will be stopped automatically if the robot stops working.
Intelligent Cleaning Patterns
EXVAC600 is able to make an efficient and reasonable cleaning pattern automatically because the navigation system that is supported by sets of high-accuracy sensors and gyroscope.
Our Water Tank
370ml for bigger mopping capacity
Maximum 150ml only for smaller area
Leaking whenever attached
Seepage flow not controllable
3 levels of controllable speed
Automatically stop leaking in parking, triggered by your order
Bigger area with a 30cm wide cloth
Uneven leaking in narrowed area
EXVAC600 is suitable for sweeping and vacuuming and low-profiled rugs/carpets.
*Please do not use it to clean long-haired carpets
Remote Operating & OTA Upgrading
Upgrade the firmware and APP edition via OTA, control and check your robot from smart phone at any time, from anywhere when network is available.
Workable with smart speaker
EXVAC600 can be connected to smart speakers such as Alexa, Google home,Yandex,Tmall Geneie. Users can start/stop the robot, set up cleaning schedules, send it back to recharge by voice control.
V-Shape Beater Brush
The V-shape Beater brush is a bristle and silicon combined brush that can be more efficient when the robot is dealing with various floor conditions with either heavy debris or floating dust.
Long-duration 2600mAh Li-ion Battery
On one full charge, the robot can continuously work for up to 130 minutes
*Data is originated from the Mamibot Lab for reference only.
Dock to charging station precisely
EXVAC600 starts to find the charging station when the battery is at 20% or lower, or when cleaning is done. Thanks to the smart sensing system that provides a precise routine for it in docking.
Only 7.5cm in Height
EXVAC600 is flexible to reach underneath areas in cleaning
Up to 2800Pa Vacuuming Power
The strong brushless motor and upgraded air flue structure enable EXVAC600 to deal with heavy debris and dust with significant suction.