Mamibot iGLASSBOT W300 Robot Window Cleaner
An advanced robot window cleaner with spray, wet wiping and squeegee cleaning for clearer, streak-free glass.
iGLASSBOT W300 combines atomized water spray, microfiber wiping and squeegee drying in one cleaning pass. With 8,000Pa suction, all-direction edge coverage, a 215ml water tank, app control and power-off safety protection, it is designed for high-rise windows, tile, glass, mirrors, tiles and other smooth vertical surfaces.
TriAqua™ Spray-Wipe-Squeegee
All-in-one cleaning system
Spraying, wet wiping, and squeegee drying in one seamless pass—no water marks left behind.
8000Pa SecureGrip™ Suction
Maintains stable adhesion through continuous suction monitoring and intelligent power adjustment.
CornerFlow™ Four-Side Edge Cleaning System
W300 features a four-side circular edge cleaning structure designed to improve glass coverage and reach difficult corners.
W300 features a four-side circular edge cleaning structure designed to improve glass coverage and reach difficult corners.
215ml Large Water Tank
The biggest water tank of robot window cleaner on the market. Cleans approx. 35㎡ per fill—no frequent refills for large windows.
Safe and Smart Worry-free Window Cleaning
W300 is equipped with a built-in 650mAh backup battery that provides 25–30 minutes of emergency holding in case of power failure. Together with a high-strength safety rope, it adds an extra layer of protection for high-rise window cleaning.
SafeHold Power-Off Protection
Built-in 650mAh backup battery provides 25-30 minutes of emergency holding
ClearRoute™ Intelligent Route Planning
Optimized cleaning paths help reduce missed areas and unnecessary repeated cleaning.
QuadSense™ Four-Side Safety Detection System
W300 uses four-side physical edge detection sensors to improve boundary recognition and safety response.
FlexSqueegee™ Adaptive Squeegee System
Inspired by professional automotive glass cleaning technology, FlexSqueegee™ maintains consistent contact with the glass surface to remove stubborn stains, excess water and reduce streaks
App Smart Control
Remote control via smartphone—start cleaning anytime, anywhere.
Multi-Surface Compatibility
Glass, tile, marble walls, wooden doors, and other smooth vertical surfaces.
Flexible Control, Quiet Cleaning
Choose from Fast, Deep, Edge, Spot and Manual cleaning modes to match different glass conditions. The dual-side 4-nozzle atomized spray system wets the glass evenly, while app control makes daily window cleaning easier and more flexible.
Detachable Mop Holder
Quick-release design for easy cleaning and drying—no mess on hands.
QuadraSpray™ Atomized Water Spray
The dual-side balanced water distribution improves cleaning efficiency while minimizing excess moisture, evenly wets the glass surface to support more thorough cleaning.
Multi-Mode Cleaning Logic
Fast, Deep, Edge, Spot and Manual modes help handle daily dust, edge cleaning and more focused spot cleaning.
Low Noise Operation
With an operating noise level of ≤70dB, W300 is designed for more comfortable use at home.
Thoughtful Details for Daily Use
The hidden handle makes W300 easy to carry and store. The integrated power cable and safety rope design helps reduce cable tangling, while low battery reminders and OTA firmware updates make daily use more convenient.
Hidden Handle Design
Easy to carry, store and handle during daily use.
2-in-1 Power Cable & Safety Rope
The integrated design helps reduce cable tangling while adding safety protection during window cleaning.
Low Battery Alarm
Real‑time reminder to recharge—no unexpected power loss.
OTA Firmware Updates
Firmware updates through the app help keep the robot optimized over time.
Specification
Frequently Asked Questions (FAQ)
Q1: What surfaces can the iGLASSBOT W300 clean?
A: The iGLASSBOT W300 is designed for smooth vertical surfaces including frameless/seamless glass, tile walls, marble walls, mirrors, and wooden doors. It is not recommended for use on rough or textured surfaces.
Q2: How much area can the iGLASSBOT W300 clean on a full tank?
A: With a 215ml water tank, the iGLASSBOT W300 can clean approximately 35㎡ per full tank—enough for multiple large windows without frequent refills.
Q3: What happens if the power goes out while the robot is cleaning?
A: The iGLASSBOT W300 is equipped with a SafeHold™ 650mAh backup battery that provides 25–30 minutes of emergency holding. The unit also comes with a high strength safety rope for added security.
Q4: How does the TriAqua™ cleaning system work?
A: The TriAqua™ system follows a three step process: Spray (atomized water wets the surface), Wipe (fiber cloth removes dirt), and Squeegee (scrapes away residual water). This ensures a streak-free, crystal-clear finish in one pass.
Q5: Can the iGLASSBOT W300 clean window corners and edges?
A: Yes. The CornerFlow™ all-direction edge coverage technology ensures full coverage of walls, corners, and frames—eliminating blind spots that plague many window cleaning robots.
Q6: How long does it take to fully charge the iGLASSBOT W300?
A: The backup battery takes approximately 2 hours to fully charge.
Q7: Is the iGLASSBOT W300 noisy during operation?
A: The operating noise level is ≤70dB, which is comparable to normal conversation levels—quiet enough for use without disturbing your family.
Q8: Can I control the iGLASSBOT W300 with my smartphone?
A: Yes. The iGLASSBOT W300 supports App control via Bluetooth, allowing you to start, stop, and select cleaning modes remotely.
Q9: How do I clean the mop cloth?
A: The mop holder features a quick-release detachable design. Simply remove the holder, wash the cloth, and let it dry before reattaching—no mess on your hands.
Q10: What cleaning modes does the iGLASSBOT W300 offer?
A: The iGLASSBOT W300 offers five cleaning modes: Fast, Deep, Edge, Spot, and Manual to suit your specific cleaning needs.
All data originated from the lab of Mamibot, please subject to the exact performance data of robot based on your on-site conditions.